/*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef EXPORT_SYMTAB #define EXPORT_SYMTAB #endif __FBSDID("$FreeBSD: src/sys/net80211/ieee80211_output.c,v 1.18 2005/01/24 20:50:20 sam Exp $"); __KERNEL_RCSID(0, "$NetBSD: ieee80211_output.c,v 1.9 2003/11/02 00:17:27 dyoung Exp $"); /* * IEEE 802.11 output handling. */ #include #include #include #include #include #include #include #include "if_llc.h" #include "if_ethersubr.h" #include "if_media.h" #include #ifdef IEEE80211_DEBUG /* * Decide if an outbound management frame should be * printed when debugging is enabled. This filters some * of the less interesting frames that come frequently * (e.g. beacons). */ static __inline int doprint(struct ieee80211com *ic, int subtype) { switch (subtype) { case IEEE80211_FC0_SUBTYPE_PROBE_RESP: return (ic->ic_opmode == IEEE80211_M_IBSS); } return 1; } #endif /* * Send a management frame to the specified node. The node pointer * must have a reference as the pointer will be passed to the driver * and potentially held for a long time. If the frame is successfully * dispatched to the driver, then it is responsible for freeing the * reference (and potentially free'ing up any associated storage). */ static int ieee80211_mgmt_output(struct ieee80211com *ic, struct ieee80211_node *ni, struct sk_buff *skb, int type) { struct net_device *dev = ic->ic_dev; struct ieee80211_frame *wh; struct ieee80211_cb *cb = (struct ieee80211_cb *)skb->cb; KASSERT(ni != NULL, ("null node")); /* * We want to pass the node down to the * driver's start routine. If we don't do so then the start * routine must immediately look it up again and that can * cause a lock order reversal if, for example, this frame * is being sent because the station is being timedout and * the frame being sent is a DEAUTH message. We stuff it in * the cb structure. */ cb->ni = ni; wh = (struct ieee80211_frame *) skb_push(skb, sizeof(struct ieee80211_frame)); wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | type; wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; *(u_int16_t *)wh->i_dur = 0; *(u_int16_t *)wh->i_seq = htole16(ni->ni_txseqs[0] << IEEE80211_SEQ_SEQ_SHIFT); ni->ni_txseqs[0]++; /* * Hack. When sending PROBE_REQ frames while scanning we * explicitly force a broadcast rather than (as before) clobber * ni_macaddr and ni_bssid. This is stopgap, we need a way * to communicate this directly rather than do something * implicit based on surrounding state. */ if (type == IEEE80211_FC0_SUBTYPE_PROBE_REQ && (ic->ic_flags & IEEE80211_F_SCAN)) { IEEE80211_ADDR_COPY(wh->i_addr1, dev->broadcast); IEEE80211_ADDR_COPY(wh->i_addr2, ic->ic_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, dev->broadcast); } else { IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_macaddr); IEEE80211_ADDR_COPY(wh->i_addr2, ic->ic_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, ni->ni_bssid); } if ((cb->flags & M_LINK0) != 0 && ni->ni_challenge != NULL) { cb->flags &= ~M_LINK0; IEEE80211_DPRINTF(ic, IEEE80211_MSG_AUTH, "[%s] encrypting frame (%s)\n", ether_sprintf(wh->i_addr1), __func__); wh->i_fc[1] |= IEEE80211_FC1_WEP; } #ifdef IEEE80211_DEBUG /* avoid printing too many frames */ if ((ieee80211_msg_debug(ic) && doprint(ic, type)) || ieee80211_msg_dumppkts(ic)) { printf("[%s] send %s on channel %u\n", ether_sprintf(wh->i_addr1), ieee80211_mgt_subtype_name[ (type & IEEE80211_FC0_SUBTYPE_MASK) >> IEEE80211_FC0_SUBTYPE_SHIFT], ieee80211_chan2ieee(ic, ni->ni_chan)); } #endif IEEE80211_NODE_STAT(ni, tx_mgmt); IF_ENQUEUE(&ic->ic_mgtq, skb); (*dev->hard_start_xmit)(NULL, dev); return 0; } /* * Send a null data frame to the specified node. */ int ieee80211_send_nulldata(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; struct net_device *dev = ic->ic_dev; struct sk_buff *skb; struct ieee80211_frame *wh; struct ieee80211_cb *cb; u_int8_t *frm; skb = ieee80211_getmgtframe(&frm, 0); if (skb == NULL) { /* XXX debug msg */ ic->ic_stats.is_tx_nobuf++; return ENOMEM; } cb = (struct ieee80211_cb *)skb->cb; cb->ni = ieee80211_ref_node(ni); wh = (struct ieee80211_frame *) skb_push(skb, sizeof(struct ieee80211_frame)); wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_NODATA; *(u_int16_t *)wh->i_dur = 0; *(u_int16_t *)wh->i_seq = htole16(ni->ni_txseqs[0] << IEEE80211_SEQ_SEQ_SHIFT); ni->ni_txseqs[0]++; /* XXX WDS */ wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_macaddr); IEEE80211_ADDR_COPY(wh->i_addr2, ni->ni_bssid); IEEE80211_ADDR_COPY(wh->i_addr3, ic->ic_myaddr); skb_trim(skb, sizeof(struct ieee80211_frame)); IEEE80211_NODE_STAT(ni, tx_data); IF_ENQUEUE(&ic->ic_mgtq, skb); /* cheat */ (*dev->hard_start_xmit)(NULL, dev); return 0; } /* * Assign priority to a frame based on any vlan tag assigned * to the station and/or any Diffserv setting in an IP header. * Finally, if an ACM policy is setup (in station mode) it's * applied. */ int ieee80211_classify(struct ieee80211com *ic, struct sk_buff *skb, struct ieee80211_node *ni) { int v_wme_ac, d_wme_ac, ac; struct ether_header *eh; const struct iphdr *ip; if ((ni->ni_flags & IEEE80211_NODE_QOS) == 0) { IEEE80211_DPRINTF(ic, IEEE80211_MSG_WME, "[%s] no QOS/WME for this node (%s)\n", __func__, ether_sprintf(ni->ni_macaddr)); ac = WME_AC_BE; goto done; } /* * If node has a vlan tag then all traffic * to it must have a matching tag. */ v_wme_ac = 0; if (ni->ni_vlan != 0) { if (ic->ic_vlgrp == NULL || !vlan_tx_tag_present(skb)) { IEEE80211_NODE_STAT(ni, tx_novlantag); return 1; } if (vlan_tx_tag_get(skb) != ni->ni_vlan) { IEEE80211_NODE_STAT(ni, tx_vlanmismatch); return 1; } /* map vlan priority to AC */ switch (vlan_get_ingress_priority(skb->dev, ni->ni_vlan)) { case 1: case 2: v_wme_ac = WME_AC_BK; break; case 0: case 3: v_wme_ac = WME_AC_BE; break; case 4: case 5: v_wme_ac = WME_AC_VI; break; case 6: case 7: v_wme_ac = WME_AC_VO; break; } } eh = (struct ether_header *) skb->data; if (eh->ether_type == __constant_htons(ETHERTYPE_IP)) { ip = skb->nh.iph; /* * IP frame, map the DSCP field (corrected version, <<2). */ IEEE80211_DPRINTF(ic, IEEE80211_MSG_WME, "ip=%p,ip->version=%d, ip->length=%d, &(ip->saddr)=%p, &(ip->daddr)=%p\n", ip, ip->version, ip->ihl, &(ip->saddr), &(ip->daddr)); IEEE80211_DPRINTF(ic, IEEE80211_MSG_WME, "[%s (%s)] src: 0x%x dst: 0x%x paket tos: 0x%x\n", __func__, ic->ic_dev->name, ip->saddr, ip->daddr, ip->tos); switch (ip->tos) { case 0x20: case 0x40: IEEE80211_DPRINTF(ic, IEEE80211_MSG_WME, "[%s (%s)] sorting packet in WME_AC_BK queue (node %s)\n", __func__, ic->ic_dev->name, ether_sprintf(ni->ni_macaddr)); d_wme_ac = WME_AC_BK; /* background */ break; case 0x80: case 0xa0: d_wme_ac = WME_AC_VI; /* video */ IEEE80211_DPRINTF(ic, IEEE80211_MSG_WME, "[%s (%s)] sorting packet in WME_AC_VI queue (node %s)\n", __func__, ic->ic_dev->name, ether_sprintf(ni->ni_macaddr)); break; case 0xc0: /* voice */ case 0xe0: case 0x88: /* XXX UPSD */ case 0xb8: IEEE80211_DPRINTF(ic, IEEE80211_MSG_WME, "[%s (%s)] sorting packet in WME_AC_VO queue (node %s)\n", __func__, ic->ic_dev->name, ether_sprintf(ni->ni_macaddr)); d_wme_ac = WME_AC_VO; break; default: IEEE80211_DPRINTF(ic, IEEE80211_MSG_WME, "[%s (%s)] sorting packet in WME_AC_BE queue (node %s)\n", __func__, ic->ic_dev->name, ether_sprintf(ni->ni_macaddr)); d_wme_ac = WME_AC_BE; break; } } else { IEEE80211_DPRINTF(ic, IEEE80211_MSG_WME, "[%s (%s)] no IP packet, sorting packet in WME_AC_BE queue (node %s)\n", __func__, ic->ic_dev->name, ether_sprintf(ni->ni_macaddr)); d_wme_ac = WME_AC_BE; } /* * Use highest priority AC. */ if (v_wme_ac > d_wme_ac) ac = v_wme_ac; else ac = d_wme_ac; /* * Apply ACM policy. */ if (ic->ic_opmode == IEEE80211_M_STA) { static const int acmap[4] = { WME_AC_BK, /* WME_AC_BE */ WME_AC_BK, /* WME_AC_BK */ WME_AC_BE, /* WME_AC_VI */ WME_AC_VI, /* WME_AC_VO */ }; while (ac != WME_AC_BK && ic->ic_wme.wme_wmeBssChanParams.cap_wmeParams[ac].wmep_acm) ac = acmap[ac]; } done: M_WME_SETAC(skb, ac); return 0; } EXPORT_SYMBOL(ieee80211_classify); /* * Insure there is sufficient headroom and tailroom to * encapsulate the 802.11 data frame. If room isn't * already there, reallocate so there is enough space. * Drivers and cipher modules assume we have done the * necessary work and fail rudely if they don't find * the space they need. */ static struct sk_buff * ieee80211_skbhdr_adjust(struct ieee80211com *ic, int hdrsize, struct ieee80211_key *key, struct sk_buff *skb) { int need_headroom = hdrsize; int need_tailroom = 0; if (key != NULL) { const struct ieee80211_cipher *cip = key->wk_cipher; /* * Adjust for crypto needs. When hardware crypto is * being used we assume the hardware/driver will deal * with any padding (on the fly, without needing to * expand the frame contents). When software crypto * is used we need to insure room is available at the * front and back and also for any per-MSDU additions. */ /* XXX belongs in crypto code? */ need_headroom += cip->ic_header; /* XXX pre-calculate per key */ if (key->wk_flags & IEEE80211_KEY_SWCRYPT) need_tailroom += cip->ic_trailer; /* XXX frags */ if (key->wk_flags & IEEE80211_KEY_SWMIC) need_tailroom += cip->ic_miclen; } /* * We know we are called just after stripping an Ethernet * header and before prepending an LLC header. This means we * need to assure the LLC header fits in. */ need_headroom += sizeof(struct llc); skb = skb_unshare(skb, GFP_ATOMIC); if (skb == NULL) { IEEE80211_DPRINTF(ic, IEEE80211_MSG_OUTPUT, "%s: cannot unshare for encapsulation\n", __func__); ic->ic_stats.is_tx_nobuf++; } else if (skb_tailroom(skb) < need_tailroom) { int headroom = skb_headroom(skb) < need_headroom ? need_headroom - skb_headroom(skb) : 0; if (pskb_expand_head(skb, headroom, need_tailroom - skb_tailroom(skb), GFP_ATOMIC)) { dev_kfree_skb(skb); IEEE80211_DPRINTF(ic, IEEE80211_MSG_OUTPUT, "%s: cannot expand storage (tail)\n", __func__); ic->ic_stats.is_tx_nobuf++; skb = NULL; } } else if (skb_headroom(skb) < need_headroom) { struct sk_buff *tmp = skb; skb = skb_realloc_headroom(skb, need_headroom); dev_kfree_skb(tmp); if (skb == NULL) { IEEE80211_DPRINTF(ic, IEEE80211_MSG_OUTPUT, "%s: cannot expand storage (head)\n", __func__); ic->ic_stats.is_tx_nobuf++; } } return skb; } #define KEY_UNDEFINED(k) ((k).wk_cipher == &ieee80211_cipher_none) /* * Return the transmit key to use in sending a unicast frame. * If a unicast key is set we use that. When no unicast key is set * we fall back to the default transmit key. */ static inline struct ieee80211_key * ieee80211_crypto_getucastkey(struct ieee80211com *ic, struct ieee80211_node *ni) { if (KEY_UNDEFINED(ni->ni_ucastkey)) { if (ic->ic_def_txkey == IEEE80211_KEYIX_NONE || KEY_UNDEFINED(ic->ic_nw_keys[ic->ic_def_txkey])) return NULL; return &ic->ic_nw_keys[ic->ic_def_txkey]; } else { return &ni->ni_ucastkey; } } /* * Return the transmit key to use in sending a multicast frame. * Multicast traffic always uses the group key which is installed as * the default tx key. */ static inline struct ieee80211_key * ieee80211_crypto_getmcastkey(struct ieee80211com *ic, struct ieee80211_node *ni) { if (ic->ic_def_txkey == IEEE80211_KEYIX_NONE || KEY_UNDEFINED(ic->ic_nw_keys[ic->ic_def_txkey])) return NULL; return &ic->ic_nw_keys[ic->ic_def_txkey]; } /* * Encapsulate an outbound data frame. The sk_buff chain is updated. * If an error is encountered NULL is returned. The caller is required * to provide a node reference and pullup the ethernet header in the * first sk_buff. */ struct sk_buff * ieee80211_encap(struct ieee80211com *ic, struct sk_buff *skb, struct ieee80211_node *ni) { struct ether_header eh; struct ieee80211_frame *wh = NULL; struct ieee80211_frame_addr4 *wh4 = NULL; struct ieee80211_key *key; struct llc *llc; int hdrsize, datalen, addqos; struct net_device *wdsdev = ni->ni_wdsdev; u_int8_t *i_seq; u_int8_t *i_fc; struct ieee80211_cb *cb = (struct ieee80211_cb *)skb->cb; KASSERT(skb->len >= sizeof(eh), ("no ethernet header!")); memcpy(&eh, skb->data, sizeof(struct ether_header)); skb_pull(skb, sizeof(struct ether_header)); /* * Insure space for additional headers. First identify * transmit key to use in calculating any buffer adjustments * required. This is also used below to do privacy * encapsulation work. Then calculate the 802.11 header * size and any padding required by the driver. * * Note key may be NULL if we fall back to the default * transmit key and that is not set. In that case the * buffer may not be expanded as needed by the cipher * routines, but they will/should discard it. */ if (ic->ic_flags & IEEE80211_F_PRIVACY) { if (ic->ic_opmode == IEEE80211_M_STA || !IEEE80211_IS_MULTICAST(eh.ether_dhost)||wdsdev) key = ieee80211_crypto_getucastkey(ic, ni); else key = ieee80211_crypto_getmcastkey(ic, ni); if (key == NULL && eh.ether_type != __constant_htons(ETHERTYPE_PAE)) { IEEE80211_DPRINTF(ic, IEEE80211_MSG_CRYPTO, "[%s] no default transmit key (%s) deftxkey %u\n", ether_sprintf(eh.ether_dhost), __func__, ic->ic_def_txkey); ic->ic_stats.is_tx_nodefkey++; } } else key = NULL; /* XXX 4-address format */ /* * XXX Some ap's don't handle QoS-encapsulated EAPOL * frames so suppress use. This may be an issue if other * ap's require all data frames to be QoS-encapsulated * once negotiated in which case we'll need to make this * configurable. */ addqos = (ni->ni_flags & IEEE80211_NODE_QOS) && eh.ether_type != __constant_htons(ETHERTYPE_PAE); if (addqos) { if(wdsdev) { hdrsize = sizeof(struct ieee80211_qosframe_addr4); } else { hdrsize = sizeof(struct ieee80211_qosframe); } } else { if(wdsdev) { hdrsize = sizeof(struct ieee80211_frame_addr4); } else { hdrsize = sizeof(struct ieee80211_frame); } } if (ic->ic_flags & IEEE80211_F_DATAPAD) hdrsize = roundup(hdrsize, sizeof(u_int32_t)); skb = ieee80211_skbhdr_adjust(ic, hdrsize, key, skb); if (skb == NULL) { /* NB: ieee80211_skbhdr_adjust handles msgs+statistics */ goto bad; } llc = (struct llc *) skb_push(skb, sizeof(struct llc)); llc->llc_dsap = llc->llc_ssap = LLC_SNAP_LSAP; llc->llc_control = LLC_UI; llc->llc_snap.org_code[0] = 0; llc->llc_snap.org_code[1] = 0; llc->llc_snap.org_code[2] = 0; llc->llc_snap.ether_type = eh.ether_type; datalen = skb->len; /* NB: w/o 802.11 header */ if(wdsdev) { wh4 = (struct ieee80211_frame_addr4*)skb_push(skb, hdrsize); wh4->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_DATA; *(u_int16_t *)wh4->i_dur = 0; i_seq = &wh4->i_seq[0]; i_fc = &wh4->i_fc[0]; } else { wh = (struct ieee80211_frame *)skb_push(skb, hdrsize); wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_DATA; *(u_int16_t *)wh->i_dur = 0; i_seq = &wh->i_seq[0]; i_fc = &wh->i_fc[0]; } switch (ic->ic_opmode) { case IEEE80211_M_STA: wh->i_fc[1] = IEEE80211_FC1_DIR_TODS; IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_bssid); IEEE80211_ADDR_COPY(wh->i_addr2, eh.ether_shost); IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_dhost); break; case IEEE80211_M_IBSS: case IEEE80211_M_AHDEMO: wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); IEEE80211_ADDR_COPY(wh->i_addr2, eh.ether_shost); /* * NB: always use the bssid from ic_bss as the * neighbor's may be stale after an ibss merge */ IEEE80211_ADDR_COPY(wh->i_addr3, ic->ic_bss->ni_bssid); break; case IEEE80211_M_HOSTAP: /* bssid is our self */ if(wdsdev) { i_fc[1] = IEEE80211_FC1_DIR_DSTODS; IEEE80211_ADDR_COPY(wh4->i_addr2, ni->ni_bssid); IEEE80211_ADDR_COPY(wh4->i_addr3, eh.ether_dhost); IEEE80211_ADDR_COPY(wh4->i_addr4, eh.ether_shost); /* addr1 is wds peer */ IEEE80211_ADDR_COPY(wh4->i_addr1, ni->ni_macaddr); } else { i_fc[1] = IEEE80211_FC1_DIR_FROMDS; IEEE80211_ADDR_COPY(wh->i_addr2, ni->ni_bssid); IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_shost); } break; case IEEE80211_M_MONITOR: goto bad; } if (cb->flags & M_MORE_DATA) wh->i_fc[1] |= IEEE80211_FC1_MORE_DATA; if (addqos) { struct ieee80211_qosframe *qwh; struct ieee80211_qosframe_addr4 *qwh4; u_int8_t *i_qos; int ac, tid; if(wdsdev) { qwh4 = (struct ieee80211_qosframe_addr4 *) wh4; i_qos = &qwh4->i_qos[0]; } else { qwh = (struct ieee80211_qosframe *) wh; i_qos = &qwh->i_qos[0]; } ac = M_WME_GETAC(skb); /* map from access class/queue to 11e header priorty value */ tid = WME_AC_TO_TID(ac); i_qos[0] = tid & IEEE80211_QOS_TID; if (ic->ic_wme.wme_wmeChanParams.cap_wmeParams[ac].wmep_noackPolicy) i_qos[0] |= 1 << IEEE80211_QOS_ACKPOLICY_S; i_qos[1] = 0; i_fc[0] |= IEEE80211_FC0_SUBTYPE_QOS; *(u_int16_t *)i_seq = htole16(ni->ni_txseqs[tid] << IEEE80211_SEQ_SEQ_SHIFT); ni->ni_txseqs[tid]++; } else { *(u_int16_t *)i_seq = htole16(ni->ni_txseqs[0] << IEEE80211_SEQ_SEQ_SHIFT); ni->ni_txseqs[0]++; } if (key != NULL) { /* * IEEE 802.1X: send EAPOL frames always in the clear. * WPA/WPA2: encrypt EAPOL keys when pairwise keys are set. */ if (eh.ether_type != __constant_htons(ETHERTYPE_PAE) || ((ic->ic_flags & IEEE80211_F_WPA) && (ic->ic_opmode == IEEE80211_M_STA ? !KEY_UNDEFINED(*key) : !KEY_UNDEFINED(ni->ni_ucastkey)))) { i_fc[1] |= IEEE80211_FC1_WEP; /* XXX do fragmentation */ if (!ieee80211_crypto_enmic(ic, key, skb, 0)) { IEEE80211_DPRINTF(ic, IEEE80211_MSG_OUTPUT, "[%s] enmic failed, discard frame\n", ether_sprintf(eh.ether_dhost)); ic->ic_stats.is_crypto_enmicfail++; goto bad; } } } //TODO: hope remove of ni->ni_inact = ic->ic_inact_run; is ok IEEE80211_NODE_STAT(ni, tx_data); IEEE80211_NODE_STAT_ADD(ni, tx_bytes, datalen); return skb; bad: if (skb != NULL) dev_kfree_skb(skb); return NULL; } EXPORT_SYMBOL(ieee80211_encap); /* * Add a supported rates element id to a frame. */ static u_int8_t * ieee80211_add_rates(u_int8_t *frm, const struct ieee80211_rateset *rs) { int nrates; *frm++ = IEEE80211_ELEMID_RATES; nrates = rs->rs_nrates; if (nrates > IEEE80211_RATE_SIZE) nrates = IEEE80211_RATE_SIZE; *frm++ = nrates; memcpy(frm, rs->rs_rates, nrates); return frm + nrates; } /* * Add an extended supported rates element id to a frame. */ static u_int8_t * ieee80211_add_xrates(u_int8_t *frm, const struct ieee80211_rateset *rs) { /* * Add an extended supported rates element if operating in 11g mode. */ if (rs->rs_nrates > IEEE80211_RATE_SIZE) { int nrates = rs->rs_nrates - IEEE80211_RATE_SIZE; *frm++ = IEEE80211_ELEMID_XRATES; *frm++ = nrates; memcpy(frm, rs->rs_rates + IEEE80211_RATE_SIZE, nrates); frm += nrates; } return frm; } /* * Add an ssid elemet to a frame. */ static u_int8_t * ieee80211_add_ssid(u_int8_t *frm, const u_int8_t *ssid, u_int len) { *frm++ = IEEE80211_ELEMID_SSID; *frm++ = len; memcpy(frm, ssid, len); return frm + len; } /* * Add an erp element to a frame. */ static u_int8_t * ieee80211_add_erp(u_int8_t *frm, struct ieee80211com *ic) { u_int8_t erp; *frm++ = IEEE80211_ELEMID_ERP; *frm++ = 1; erp = 0; if (ic->ic_nonerpsta != 0) erp |= IEEE80211_ERP_NON_ERP_PRESENT; if (ic->ic_flags & IEEE80211_F_USEPROT) erp |= IEEE80211_ERP_USE_PROTECTION; if (ic->ic_flags & IEEE80211_F_USEBARKER) erp |= IEEE80211_ERP_LONG_PREAMBLE; *frm++ = erp; return frm; } static u_int8_t * ieee80211_setup_wpa_ie(struct ieee80211com *ic, u_int8_t *ie) { #define WPA_OUI_BYTES 0x00, 0x50, 0xf2 #define ADDSHORT(frm, v) do { \ frm[0] = (v) & 0xff; \ frm[1] = (v) >> 8; \ frm += 2; \ } while (0) #define ADDSELECTOR(frm, sel) do { \ memcpy(frm, sel, 4); \ frm += 4; \ } while (0) static const u_int8_t oui[4] = { WPA_OUI_BYTES, WPA_OUI_TYPE }; static const u_int8_t cipher_suite[][4] = { { WPA_OUI_BYTES, WPA_CSE_WEP40 }, /* NB: 40-bit */ { WPA_OUI_BYTES, WPA_CSE_TKIP }, { 0x00, 0x00, 0x00, 0x00 }, /* XXX WRAP */ { WPA_OUI_BYTES, WPA_CSE_CCMP }, { 0x00, 0x00, 0x00, 0x00 }, /* XXX CKIP */ { WPA_OUI_BYTES, WPA_CSE_NULL }, }; static const u_int8_t wep104_suite[4] = { WPA_OUI_BYTES, WPA_CSE_WEP104 }; static const u_int8_t key_mgt_unspec[4] = { WPA_OUI_BYTES, WPA_ASE_8021X_UNSPEC }; static const u_int8_t key_mgt_psk[4] = { WPA_OUI_BYTES, WPA_ASE_8021X_PSK }; const struct ieee80211_rsnparms *rsn = &ic->ic_bss->ni_rsn; u_int8_t *frm = ie; u_int8_t *selcnt; *frm++ = IEEE80211_ELEMID_VENDOR; *frm++ = 0; /* length filled in below */ memcpy(frm, oui, sizeof(oui)); /* WPA OUI */ frm += sizeof(oui); ADDSHORT(frm, WPA_VERSION); /* XXX filter out CKIP */ /* multicast cipher */ if (rsn->rsn_mcastcipher == IEEE80211_CIPHER_WEP && rsn->rsn_mcastkeylen >= 13) ADDSELECTOR(frm, wep104_suite); else ADDSELECTOR(frm, cipher_suite[rsn->rsn_mcastcipher]); /* unicast cipher list */ selcnt = frm; ADDSHORT(frm, 0); /* selector count */ if (rsn->rsn_ucastcipherset & (1<rsn_ucastcipherset & (1<rsn_keymgmtset & WPA_ASE_8021X_UNSPEC) { selcnt[0]++; ADDSELECTOR(frm, key_mgt_unspec); } if (rsn->rsn_keymgmtset & WPA_ASE_8021X_PSK) { selcnt[0]++; ADDSELECTOR(frm, key_mgt_psk); } /* optional capabilities */ if (rsn->rsn_caps != 0 && rsn->rsn_caps != RSN_CAP_PREAUTH) ADDSHORT(frm, rsn->rsn_caps); /* calculate element length */ ie[1] = frm - ie - 2; KASSERT(ie[1]+2 <= (int)sizeof(struct ieee80211_ie_wpa), ("WPA IE too big, %u > %u", ie[1]+2, (int)sizeof(struct ieee80211_ie_wpa))); /* we use a cast to (int) instead of %zu for backwards * compatibility with old kernel versions */ return frm; #undef ADDSHORT #undef ADDSELECTOR #undef WPA_OUI_BYTES } static u_int8_t * ieee80211_setup_rsn_ie(struct ieee80211com *ic, u_int8_t *ie) { #define RSN_OUI_BYTES 0x00, 0x0f, 0xac #define ADDSHORT(frm, v) do { \ frm[0] = (v) & 0xff; \ frm[1] = (v) >> 8; \ frm += 2; \ } while (0) #define ADDSELECTOR(frm, sel) do { \ memcpy(frm, sel, 4); \ frm += 4; \ } while (0) static const u_int8_t cipher_suite[][4] = { { RSN_OUI_BYTES, RSN_CSE_WEP40 }, /* NB: 40-bit */ { RSN_OUI_BYTES, RSN_CSE_TKIP }, { RSN_OUI_BYTES, RSN_CSE_WRAP }, { RSN_OUI_BYTES, RSN_CSE_CCMP }, { 0x00, 0x00, 0x00, 0x00 }, /* XXX CKIP */ { RSN_OUI_BYTES, RSN_CSE_NULL }, }; static const u_int8_t wep104_suite[4] = { RSN_OUI_BYTES, RSN_CSE_WEP104 }; static const u_int8_t key_mgt_unspec[4] = { RSN_OUI_BYTES, RSN_ASE_8021X_UNSPEC }; static const u_int8_t key_mgt_psk[4] = { RSN_OUI_BYTES, RSN_ASE_8021X_PSK }; const struct ieee80211_rsnparms *rsn = &ic->ic_bss->ni_rsn; u_int8_t *frm = ie; u_int8_t *selcnt; *frm++ = IEEE80211_ELEMID_RSN; *frm++ = 0; /* length filled in below */ ADDSHORT(frm, RSN_VERSION); /* XXX filter out CKIP */ /* multicast cipher */ if (rsn->rsn_mcastcipher == IEEE80211_CIPHER_WEP && rsn->rsn_mcastkeylen >= 13) ADDSELECTOR(frm, wep104_suite); else ADDSELECTOR(frm, cipher_suite[rsn->rsn_mcastcipher]); /* unicast cipher list */ selcnt = frm; ADDSHORT(frm, 0); /* selector count */ if (rsn->rsn_ucastcipherset & (1<rsn_ucastcipherset & (1<rsn_keymgmtset & WPA_ASE_8021X_UNSPEC) { selcnt[0]++; ADDSELECTOR(frm, key_mgt_unspec); } if (rsn->rsn_keymgmtset & WPA_ASE_8021X_PSK) { selcnt[0]++; ADDSELECTOR(frm, key_mgt_psk); } /* optional capabilities */ ADDSHORT(frm, rsn->rsn_caps); /* XXX PMKID */ /* calculate element length */ ie[1] = frm - ie - 2; KASSERT(ie[1]+2 <= (int)sizeof(struct ieee80211_ie_wpa), ("RSN IE too big, %u > %u", ie[1]+2, (int)sizeof(struct ieee80211_ie_wpa))); /* we use a cast to (int) instead of %zu for backwards * compatibility with old kernel versions */ return frm; #undef ADDSELECTOR #undef ADDSHORT #undef RSN_OUI_BYTES } /* * Add a WPA/RSN element to a frame. */ static u_int8_t * ieee80211_add_wpa(u_int8_t *frm, struct ieee80211com *ic) { KASSERT(ic->ic_flags & IEEE80211_F_WPA, ("no WPA/RSN!")); if (ic->ic_flags & IEEE80211_F_WPA2) frm = ieee80211_setup_rsn_ie(ic, frm); if (ic->ic_flags & IEEE80211_F_WPA1) frm = ieee80211_setup_wpa_ie(ic, frm); return frm; } #define WME_OUI_BYTES 0x00, 0x50, 0xf2 /* * Add a WME information element to a frame. */ static u_int8_t * ieee80211_add_wme_info(u_int8_t *frm, struct ieee80211_wme_state *wme) { static const struct ieee80211_wme_info info = { .wme_id = IEEE80211_ELEMID_VENDOR, .wme_len = sizeof(struct ieee80211_wme_info) - 2, .wme_oui = { WME_OUI_BYTES }, .wme_type = WME_OUI_TYPE, .wme_subtype = WME_INFO_OUI_SUBTYPE, .wme_version = WME_VERSION, .wme_info = 0, }; memcpy(frm, &info, sizeof(info)); return frm + sizeof(info); } /* * Add a WME parameters element to a frame. */ static u_int8_t * ieee80211_add_wme_param(u_int8_t *frm, struct ieee80211_wme_state *wme) { #define SM(_v, _f) (((_v) << _f##_S) & _f) #define ADDSHORT(frm, v) do { \ frm[0] = (v) & 0xff; \ frm[1] = (v) >> 8; \ frm += 2; \ } while (0) /* NB: this works 'cuz a param has an info at the front */ static const struct ieee80211_wme_info param = { .wme_id = IEEE80211_ELEMID_VENDOR, .wme_len = sizeof(struct ieee80211_wme_param) - 2, .wme_oui = { WME_OUI_BYTES }, .wme_type = WME_OUI_TYPE, .wme_subtype = WME_PARAM_OUI_SUBTYPE, .wme_version = WME_VERSION, }; int i; memcpy(frm, ¶m, sizeof(param)); frm += offsetof(struct ieee80211_wme_info, wme_info); *frm++ = wme->wme_bssChanParams.cap_info; /* AC info */ *frm++ = 0; /* reserved field */ for (i = 0; i < WME_NUM_AC; i++) { const struct wmeParams *ac = &wme->wme_bssChanParams.cap_wmeParams[i]; *frm++ = SM(i, WME_PARAM_ACI) | SM(ac->wmep_acm, WME_PARAM_ACM) | SM(ac->wmep_aifsn, WME_PARAM_AIFSN) ; *frm++ = SM(ac->wmep_logcwmax, WME_PARAM_LOGCWMAX) | SM(ac->wmep_logcwmin, WME_PARAM_LOGCWMIN) ; ADDSHORT(frm, ac->wmep_txopLimit); } return frm; #undef SM #undef ADDSHORT } #undef WME_OUI_BYTES /* * Send a management frame. The node is for the destination (or ic_bss * when in station mode). Nodes other than ic_bss have their reference * count bumped to reflect our use for an indeterminant time. */ int ieee80211_send_mgmt(struct ieee80211com *ic, struct ieee80211_node *ni, int type, int arg) { #define senderr(_x, _v) do { ic->ic_stats._v++; ret = _x; goto bad; } while (0) struct sk_buff *skb; u_int8_t *frm; enum ieee80211_phymode mode; u_int16_t capinfo; int has_challenge, is_shared_key, ret, timer, status; KASSERT(ni != NULL, ("null node")); /* * Hold a reference on the node so it doesn't go away until after * the xmit is complete all the way in the driver. On error we * will remove our reference. */ IEEE80211_DPRINTF(ic, IEEE80211_MSG_NODE, "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1); ieee80211_ref_node(ni); timer = 0; switch (type) { case IEEE80211_FC0_SUBTYPE_PROBE_REQ: /* * prreq frame format * [tlv] ssid * [tlv] supported rates * [tlv] extended supported rates * [tlv] user-specified ie's */ skb = ieee80211_getmgtframe(&frm, 2 + IEEE80211_NWID_LEN + 2 + IEEE80211_RATE_SIZE + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) + (ic->ic_opt_ie != NULL ? ic->ic_opt_ie_len : 0) ); if (skb == NULL) senderr(ENOMEM, is_tx_nobuf); frm = ieee80211_add_ssid(frm, ic->ic_des_essid, ic->ic_des_esslen); mode = ieee80211_chan2mode(ic, ni->ni_chan); frm = ieee80211_add_rates(frm, &ic->ic_sup_rates[mode]); frm = ieee80211_add_xrates(frm, &ic->ic_sup_rates[mode]); if (ic->ic_opt_ie != NULL) { memcpy(frm, ic->ic_opt_ie, ic->ic_opt_ie_len); frm += ic->ic_opt_ie_len; } skb_trim(skb, frm - skb->data); IEEE80211_NODE_STAT(ni, tx_probereq); if (ic->ic_opmode == IEEE80211_M_STA) timer = IEEE80211_TRANS_WAIT; break; case IEEE80211_FC0_SUBTYPE_PROBE_RESP: /* * probe response frame format * [8] time stamp * [2] beacon interval * [2] cabability information * [tlv] ssid * [tlv] supported rates * [tlv] parameter set (FH/DS) * [tlv] parameter set (IBSS) * [tlv] extended rate phy (ERP) * [tlv] extended supported rates * [tlv] WPA * [tlv] WME (optional) */ skb = ieee80211_getmgtframe(&frm, 8 + sizeof(u_int16_t) + sizeof(u_int16_t) + 2 + IEEE80211_NWID_LEN + 2 + IEEE80211_RATE_SIZE + 7 /* max(7,3) */ + 6 + 3 + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) /* XXX !WPA1+WPA2 fits w/o a cluster */ + (ic->ic_flags & IEEE80211_F_WPA ? 2*sizeof(struct ieee80211_ie_wpa) : 0) + sizeof(struct ieee80211_wme_param) ); if (skb == NULL) senderr(ENOMEM, is_tx_nobuf); memset(frm, 0, 8); /* timestamp should be filled later */ frm += 8; *(u_int16_t *)frm = htole16(ic->ic_bss->ni_intval); frm += 2; if (ic->ic_opmode == IEEE80211_M_IBSS) capinfo = IEEE80211_CAPINFO_IBSS; else capinfo = IEEE80211_CAPINFO_ESS; if (ic->ic_flags & IEEE80211_F_PRIVACY) capinfo |= IEEE80211_CAPINFO_PRIVACY; if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; if (ic->ic_flags & IEEE80211_F_SHSLOT) capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; *(u_int16_t *)frm = htole16(capinfo); frm += 2; frm = ieee80211_add_ssid(frm, ic->ic_bss->ni_essid, ic->ic_bss->ni_esslen); frm = ieee80211_add_rates(frm, &ni->ni_rates); if (ic->ic_phytype == IEEE80211_T_FH) { *frm++ = IEEE80211_ELEMID_FHPARMS; *frm++ = 5; *frm++ = ni->ni_fhdwell & 0x00ff; *frm++ = (ni->ni_fhdwell >> 8) & 0x00ff; *frm++ = IEEE80211_FH_CHANSET( ieee80211_chan2ieee(ic, ni->ni_chan)); *frm++ = IEEE80211_FH_CHANPAT( ieee80211_chan2ieee(ic, ni->ni_chan)); *frm++ = ni->ni_fhindex; } else { *frm++ = IEEE80211_ELEMID_DSPARMS; *frm++ = 1; *frm++ = ieee80211_chan2ieee(ic, ni->ni_chan); } if (ic->ic_opmode == IEEE80211_M_IBSS) { *frm++ = IEEE80211_ELEMID_IBSSPARMS; *frm++ = 2; *frm++ = 0; *frm++ = 0; /* TODO: ATIM window */ } frm = ieee80211_add_xrates(frm, &ni->ni_rates); if (ic->ic_curmode == IEEE80211_MODE_11G || ic->ic_curmode == IEEE80211_MODE_TURBO_G) frm = ieee80211_add_erp(frm, ic); if (ic->ic_flags & IEEE80211_F_WPA) frm = ieee80211_add_wpa(frm, ic); if (ic->ic_flags & IEEE80211_F_WME) frm = ieee80211_add_wme_param(frm, &ic->ic_wme); skb_trim(skb, frm - skb->data); break; case IEEE80211_FC0_SUBTYPE_AUTH: status = arg >> 16; arg &= 0xffff; has_challenge = ((arg == IEEE80211_AUTH_SHARED_CHALLENGE || arg == IEEE80211_AUTH_SHARED_RESPONSE) && ni->ni_challenge != NULL); /* * Deduce whether we're doing open authentication or * shared key authentication. We do the latter if * we're in the middle of a shared key authentication * handshake or if we're initiating an authentication * request and configured to use shared key. */ is_shared_key = has_challenge || arg >= IEEE80211_AUTH_SHARED_RESPONSE || (arg == IEEE80211_AUTH_SHARED_REQUEST && ic->ic_bss->ni_authmode == IEEE80211_AUTH_SHARED); skb = ieee80211_getmgtframe(&frm, 3 * sizeof(u_int16_t) + (has_challenge && status == IEEE80211_STATUS_SUCCESS ? sizeof(u_int16_t)+IEEE80211_CHALLENGE_LEN : 0) ); if (skb == NULL) senderr(ENOMEM, is_tx_nobuf); ((u_int16_t *)frm)[0] = (is_shared_key) ? htole16(IEEE80211_AUTH_ALG_SHARED) : htole16(IEEE80211_AUTH_ALG_OPEN); ((u_int16_t *)frm)[1] = htole16(arg); /* sequence number */ ((u_int16_t *)frm)[2] = htole16(status);/* status */ if (has_challenge && status == IEEE80211_STATUS_SUCCESS) { ((u_int16_t *)frm)[3] = htole16((IEEE80211_CHALLENGE_LEN << 8) | IEEE80211_ELEMID_CHALLENGE); memcpy(&((u_int16_t *)frm)[4], ni->ni_challenge, IEEE80211_CHALLENGE_LEN); skb_trim(skb, 4 * sizeof(u_int16_t) + IEEE80211_CHALLENGE_LEN); if (arg == IEEE80211_AUTH_SHARED_RESPONSE) { struct ieee80211_cb *cb = (struct ieee80211_cb *)skb->cb; IEEE80211_DPRINTF(ic, IEEE80211_MSG_AUTH, "[%s] request encrypt frame (%s)\n", ether_sprintf(ni->ni_macaddr), __func__); cb->flags |= M_LINK0; /* WEP-encrypt, please */ } } else skb_trim(skb, 3 * sizeof(u_int16_t)); /* XXX not right for shared key */ if (status == IEEE80211_STATUS_SUCCESS) IEEE80211_NODE_STAT(ni, tx_auth); else IEEE80211_NODE_STAT(ni, tx_auth_fail); if (ic->ic_opmode == IEEE80211_M_STA) timer = IEEE80211_TRANS_WAIT; break; case IEEE80211_FC0_SUBTYPE_DEAUTH: IEEE80211_DPRINTF(ic, IEEE80211_MSG_AUTH, "[%s] send station deauthenticate (reason %d)\n", ether_sprintf(ni->ni_macaddr), arg); skb = ieee80211_getmgtframe(&frm, sizeof(u_int16_t)); if (skb == NULL) senderr(ENOMEM, is_tx_nobuf); *(u_int16_t *)frm = htole16(arg); /* reason */ skb_trim(skb, sizeof(u_int16_t)); IEEE80211_NODE_STAT(ni, tx_deauth); IEEE80211_NODE_STAT_SET(ni, tx_deauth_code, arg); ieee80211_node_unauthorize(ni); /* port closed */ break; case IEEE80211_FC0_SUBTYPE_ASSOC_REQ: case IEEE80211_FC0_SUBTYPE_REASSOC_REQ: /* * asreq frame format * [2] capability information * [2] listen interval * [6*] current AP address (reassoc only) * [tlv] ssid * [tlv] supported rates * [tlv] extended supported rates * [tlv] WME * [tlv] user-specified ie's */ skb = ieee80211_getmgtframe(&frm, sizeof(u_int16_t) + sizeof(u_int16_t) + IEEE80211_ADDR_LEN + 2 + IEEE80211_NWID_LEN + 2 + IEEE80211_RATE_SIZE + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) + sizeof(struct ieee80211_wme_info) + (ic->ic_opt_ie != NULL ? ic->ic_opt_ie_len : 0) ); if (skb == NULL) senderr(ENOMEM, is_tx_nobuf); capinfo = 0; if (ic->ic_opmode == IEEE80211_M_IBSS) capinfo |= IEEE80211_CAPINFO_IBSS; else /* IEEE80211_M_STA */ capinfo |= IEEE80211_CAPINFO_ESS; if (ic->ic_flags & IEEE80211_F_PRIVACY) capinfo |= IEEE80211_CAPINFO_PRIVACY; /* * NB: Some 11a AP's reject the request when * short premable is set. */ if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME) && (ic->ic_caps & IEEE80211_C_SHSLOT)) capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; *(u_int16_t *)frm = htole16(capinfo); frm += 2; *(u_int16_t *)frm = htole16(ic->ic_lintval); frm += 2; if (type == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) { IEEE80211_ADDR_COPY(frm, ic->ic_bss->ni_bssid); frm += IEEE80211_ADDR_LEN; } frm = ieee80211_add_ssid(frm, ni->ni_essid, ni->ni_esslen); frm = ieee80211_add_rates(frm, &ni->ni_rates); frm = ieee80211_add_xrates(frm, &ni->ni_rates); if ((ic->ic_flags & IEEE80211_F_WME) && ni->ni_wme_ie != NULL) frm = ieee80211_add_wme_info(frm, &ic->ic_wme); if (ic->ic_opt_ie != NULL) { memcpy(frm, ic->ic_opt_ie, ic->ic_opt_ie_len); frm += ic->ic_opt_ie_len; } skb_trim(skb, frm - skb->data); timer = IEEE80211_TRANS_WAIT; break; case IEEE80211_FC0_SUBTYPE_ASSOC_RESP: case IEEE80211_FC0_SUBTYPE_REASSOC_RESP: /* * asreq frame format * [2] capability information * [2] status * [2] association ID * [tlv] supported rates * [tlv] extended supported rates * [tlv] WME (if enabled and STA enabled) */ skb = ieee80211_getmgtframe(&frm, sizeof(u_int16_t) + sizeof(u_int16_t) + sizeof(u_int16_t) + 2 + IEEE80211_RATE_SIZE + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) + sizeof(struct ieee80211_wme_param) ); if (skb == NULL) senderr(ENOMEM, is_tx_nobuf); capinfo = IEEE80211_CAPINFO_ESS; if (ic->ic_flags & IEEE80211_F_PRIVACY) capinfo |= IEEE80211_CAPINFO_PRIVACY; if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; if (ic->ic_flags & IEEE80211_F_SHSLOT) capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; *(u_int16_t *)frm = htole16(capinfo); frm += 2; *(u_int16_t *)frm = htole16(arg); /* status */ frm += 2; if (arg == IEEE80211_STATUS_SUCCESS) { *(u_int16_t *)frm = htole16(ni->ni_associd); IEEE80211_NODE_STAT(ni, tx_assoc); } else IEEE80211_NODE_STAT(ni, tx_assoc_fail); frm += 2; frm = ieee80211_add_rates(frm, &ni->ni_rates); frm = ieee80211_add_xrates(frm, &ni->ni_rates); if ((ic->ic_flags & IEEE80211_F_WME) && ni->ni_wme_ie != NULL) frm = ieee80211_add_wme_param(frm, &ic->ic_wme); skb_trim(skb, frm - skb->data); break; case IEEE80211_FC0_SUBTYPE_DISASSOC: IEEE80211_DPRINTF(ic, IEEE80211_MSG_ASSOC, "[%s] send station disassociate (reason %d)\n", ether_sprintf(ni->ni_macaddr), arg); skb = ieee80211_getmgtframe(&frm, sizeof(u_int16_t)); if (skb == NULL) senderr(ENOMEM, is_tx_nobuf); *(u_int16_t *)frm = htole16(arg); /* reason */ skb_trim(skb, sizeof(u_int16_t)); IEEE80211_NODE_STAT(ni, tx_disassoc); IEEE80211_NODE_STAT_SET(ni, tx_disassoc_code, arg); break; default: IEEE80211_DPRINTF(ic, IEEE80211_MSG_ANY, "[%s] invalid mgmt frame type %u\n", ether_sprintf(ni->ni_macaddr), type); senderr(EINVAL, is_tx_unknownmgt); /* NOTREACHED */ } ret = ieee80211_mgmt_output(ic, ni, skb, type); if (ret == 0) { if (timer) ic->ic_mgt_timer = timer; } else { bad: ieee80211_free_node(ni); } return ret; #undef senderr } /* * Allocate a beacon frame and fillin the appropriate bits. */ struct sk_buff * ieee80211_beacon_alloc(struct ieee80211com *ic, struct ieee80211_node *ni, struct ieee80211_beacon_offsets *bo) { struct net_device *dev = ic->ic_dev; struct ieee80211_frame *wh; struct sk_buff *skb; struct ieee80211_cb *cb; int pktlen; u_int8_t *frm, *efrm; u_int16_t capinfo; struct ieee80211_rateset *rs; /* * beacon frame format * [8] time stamp * [2] beacon interval * [2] cabability information * [tlv] ssid * [tlv] supported rates * [3] parameter set (DS) * [tlv] parameter set (IBSS/TIM) * [tlv] extended rate phy (ERP) * [tlv] extended supported rates * [tlv] WME parameters * [tlv] WPA/RSN parameters * XXX Vendor-specific OIDs (e.g. Atheros) * NB: we allocate the max space required for the TIM bitmap. */ rs = &ni->ni_rates; pktlen = 8 /* time stamp */ + sizeof(u_int16_t) /* beacon interval */ + sizeof(u_int16_t) /* capabilities */ + 2 + ni->ni_esslen /* ssid */ + 2 + IEEE80211_RATE_SIZE /* supported rates */ + 2 + 1 /* DS parameters */ + 2 + 4 + ic->ic_tim_len /* DTIM/IBSSPARMS */ + 2 + 1 /* ERP */ + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) + (ic->ic_caps & IEEE80211_C_WME ? /* WME */ sizeof(struct ieee80211_wme_param) : 0) + (ic->ic_caps & IEEE80211_C_WPA ? /* WPA 1+2 */ 2*sizeof(struct ieee80211_ie_wpa) : 0) ; skb = ieee80211_getmgtframe(&frm, pktlen); cb = (struct ieee80211_cb *) skb->cb; if (skb == NULL) { IEEE80211_DPRINTF(ic, IEEE80211_MSG_ANY, "%s: cannot get buf; size %u\n", __func__, pktlen); ic->ic_stats.is_tx_nobuf++; return NULL; } memset(frm, 0, 8); /* XXX timestamp is set by hardware/driver */ frm += 8; *(u_int16_t *)frm = htole16(ni->ni_intval); frm += 2; if (ic->ic_opmode == IEEE80211_M_IBSS) capinfo = IEEE80211_CAPINFO_IBSS; else capinfo = IEEE80211_CAPINFO_ESS; if (ic->ic_flags & IEEE80211_F_PRIVACY) capinfo |= IEEE80211_CAPINFO_PRIVACY; if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; if (ic->ic_flags & IEEE80211_F_SHSLOT) capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; bo->bo_caps = (u_int16_t *)frm; *(u_int16_t *)frm = htole16(capinfo); frm += 2; *frm++ = IEEE80211_ELEMID_SSID; if ((ic->ic_flags & IEEE80211_F_HIDESSID) == 0) { *frm++ = ni->ni_esslen; memcpy(frm, ni->ni_essid, ni->ni_esslen); frm += ni->ni_esslen; } else *frm++ = 0; frm = ieee80211_add_rates(frm, rs); if (ic->ic_curmode != IEEE80211_MODE_FH) { *frm++ = IEEE80211_ELEMID_DSPARMS; *frm++ = 1; *frm++ = ieee80211_chan2ieee(ic, ni->ni_chan); } bo->bo_tim = frm; if (ic->ic_opmode == IEEE80211_M_IBSS) { *frm++ = IEEE80211_ELEMID_IBSSPARMS; *frm++ = 2; *frm++ = 0; *frm++ = 0; /* TODO: ATIM window */ bo->bo_tim_len = 0; } else { struct ieee80211_tim_ie *tie = (struct ieee80211_tim_ie *) frm; tie->tim_ie = IEEE80211_ELEMID_TIM; tie->tim_len = 4; /* length */ tie->tim_count = 0; /* DTIM count */ tie->tim_period = ic->ic_dtim_period; /* DTIM period */ tie->tim_bitctl = 0; /* bitmap control */ tie->tim_bitmap[0] = 0; /* Partial Virtual Bitmap */ frm += sizeof(struct ieee80211_tim_ie); bo->bo_tim_len = 1; } bo->bo_trailer = frm; if (ic->ic_flags & IEEE80211_F_WME) { bo->bo_wme = frm; frm = ieee80211_add_wme_param(frm, &ic->ic_wme); ic->ic_flags &= ~IEEE80211_F_WMEUPDATE; } if (ic->ic_flags & IEEE80211_F_WPA) frm = ieee80211_add_wpa(frm, ic); if (ic->ic_curmode == IEEE80211_MODE_11G || ic->ic_curmode == IEEE80211_MODE_TURBO_G) frm = ieee80211_add_erp(frm, ic); efrm = ieee80211_add_xrates(frm, rs); cb->ni = ni; bo->bo_trailer_len = efrm - bo->bo_trailer; skb_trim(skb, efrm - skb->data); wh = (struct ieee80211_frame *) skb_push(skb, sizeof(struct ieee80211_frame)); wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_BEACON; wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; *(u_int16_t *)wh->i_dur = 0; IEEE80211_ADDR_COPY(wh->i_addr1, dev->broadcast); IEEE80211_ADDR_COPY(wh->i_addr2, ic->ic_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, ni->ni_bssid); *(u_int16_t *)wh->i_seq = 0; return skb; } EXPORT_SYMBOL(ieee80211_beacon_alloc); /* * Update the dynamic parts of a beacon frame based on the current state. */ int ieee80211_beacon_update(struct ieee80211com *ic, struct ieee80211_node *ni, struct ieee80211_beacon_offsets *bo, struct sk_buff *skb0, int mcast) { int len_changed = 0; u_int16_t capinfo; unsigned long flags; IEEE80211_BEACON_LOCK(ic, flags); /* XXX faster to recalculate entirely or just changes? */ if (ic->ic_opmode == IEEE80211_M_IBSS) capinfo = IEEE80211_CAPINFO_IBSS; else capinfo = IEEE80211_CAPINFO_ESS; if (ic->ic_flags & IEEE80211_F_PRIVACY) capinfo |= IEEE80211_CAPINFO_PRIVACY; if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; if (ic->ic_flags & IEEE80211_F_SHSLOT) capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; *bo->bo_caps = htole16(capinfo); if (ic->ic_flags & IEEE80211_F_WME) { struct ieee80211_wme_state *wme = &ic->ic_wme; /* * Check for agressive mode change. When there is * significant high priority traffic in the BSS * throttle back BE traffic by using conservative * parameters. Otherwise BE uses agressive params * to optimize performance of legacy/non-QoS traffic. */ if (wme->wme_flags & WME_F_AGGRMODE) { if (wme->wme_hipri_traffic > wme->wme_hipri_switch_thresh) { IEEE80211_DPRINTF(ic, IEEE80211_MSG_WME, "%s: traffic %u, disable aggressive mode\n", __func__, wme->wme_hipri_traffic); wme->wme_flags &= ~WME_F_AGGRMODE; ieee80211_wme_updateparams_locked(ic); wme->wme_hipri_traffic = wme->wme_hipri_switch_hysteresis; } else wme->wme_hipri_traffic = 0; } else { if (wme->wme_hipri_traffic <= wme->wme_hipri_switch_thresh) { IEEE80211_DPRINTF(ic, IEEE80211_MSG_WME, "%s: traffic %u, enable aggressive mode\n", __func__, wme->wme_hipri_traffic); wme->wme_flags |= WME_F_AGGRMODE; ieee80211_wme_updateparams_locked(ic); wme->wme_hipri_traffic = 0; } else wme->wme_hipri_traffic = wme->wme_hipri_switch_hysteresis; } if (ic->ic_flags & IEEE80211_F_WMEUPDATE) { (void) ieee80211_add_wme_param(bo->bo_wme, wme); ic->ic_flags &= ~IEEE80211_F_WMEUPDATE; } } if (ic->ic_opmode == IEEE80211_M_HOSTAP) { /* NB: no IBSS support*/ struct ieee80211_tim_ie *tie = (struct ieee80211_tim_ie *) bo->bo_tim; if (ic->ic_flags & IEEE80211_F_TIMUPDATE) { u_int timlen, timoff, i; /* * ATIM/DTIM needs updating. If it fits in the * current space allocated then just copy in the * new bits. Otherwise we need to move any trailing * data to make room. Note that we know there is * contiguous space because ieee80211_beacon_allocate * insures there is space in the mbuf to write a * maximal-size virtual bitmap (based on ic_max_aid). */ /* * Calculate the bitmap size and offset, copy any * trailer out of the way, and then copy in the * new bitmap and update the information element. * Note that the tim bitmap must contain at least * one byte and any offset must be even. */ if (ic->ic_ps_pending != 0) { timoff = 128; /* impossibly large */ for (i = 0; i < ic->ic_tim_len; i++) if (ic->ic_tim_bitmap[i]) { timoff = i &~ 1; break; } KASSERT(timoff != 128, ("tim bitmap empty!")); for (i = ic->ic_tim_len-1; i >= timoff; i--) if (ic->ic_tim_bitmap[i]) break; timlen = 1 + (i - timoff); } else { timoff = 0; timlen = 1; } if (timlen != bo->bo_tim_len) { /* copy up/down trailer */ memmove(tie->tim_bitmap+timlen, bo->bo_trailer, bo->bo_trailer_len); bo->bo_trailer = tie->tim_bitmap+timlen; bo->bo_wme = bo->bo_trailer; bo->bo_tim_len = timlen; /* update information element */ tie->tim_len = 3 + timlen; tie->tim_bitctl = timoff; len_changed = 1; } memcpy(tie->tim_bitmap, ic->ic_tim_bitmap + timoff, bo->bo_tim_len); ic->ic_flags &= ~IEEE80211_F_TIMUPDATE; IEEE80211_DPRINTF(ic, IEEE80211_MSG_POWER, "%s: TIM updated, pending %u, off %u, len %u\n", __func__, ic->ic_ps_pending, timoff, timlen); } /* count down DTIM period */ if (tie->tim_count == 0) tie->tim_count = tie->tim_period - 1; else tie->tim_count--; /* update state for buffered multicast frames on DTIM */ if (mcast && (tie->tim_count == 0 || tie->tim_period == 1)) tie->tim_bitctl |= 1; else tie->tim_bitctl &= ~1; } IEEE80211_BEACON_UNLOCK(ic, flags); return len_changed; } EXPORT_SYMBOL(ieee80211_beacon_update); /* * Save an outbound packet for a node in power-save sleep state. * The new packet is placed on the node's saved queue, and the TIM * is changed, if necessary. */ void ieee80211_pwrsave(struct ieee80211com *ic, struct ieee80211_node *ni, struct sk_buff *skb) { int qlen, age; IEEE80211_NODE_SAVEQ_LOCK(ni); if (_IF_QFULL(&ni->ni_savedq)) { IEEE80211_NODE_SAVEQ_UNLOCK(ni); IEEE80211_DPRINTF(ic, IEEE80211_MSG_ANY, "[%s] pwr save q overflow (max size %d)\n", ether_sprintf(ni->ni_macaddr), IEEE80211_PS_MAX_QUEUE); #ifdef IEEE80211_DEBUG if (ieee80211_msg_dumppkts(ic)) ieee80211_dump_pkt((caddr_t) skb->data, skb->len, -1, -1); #endif dev_kfree_skb(skb); return; } /* * Tag the frame with it's expiry time and insert * it in the queue. The aging interval is 4 times * the listen interval specified by the station. * Frames that sit around too long are reclaimed * using this information. */ /* XXX handle overflow? */ age = ((ni->ni_intval * ic->ic_lintval) << 2) / 1024; /* TU -> secs */ _IEEE80211_NODE_SAVEQ_ENQUEUE(ni, skb, qlen, age); IEEE80211_NODE_SAVEQ_UNLOCK(ni); IEEE80211_DPRINTF(ic, IEEE80211_MSG_POWER, "[%s] save frame, %u now queued\n", ether_sprintf(ni->ni_macaddr), qlen); if (qlen == 1) ic->ic_set_tim(ni, 1); } EXPORT_SYMBOL(ieee80211_pwrsave);